Hear Ye! Hear Ye! The Spirits are about to speak!

Tonight we accomplished the following:

1.) Jacob and Matt continued to sketch the work we are accomplishing in the shop. It looks like they are actually able to find interfernces and dimension issues and help us to catch problems before we make them real! Our Inventos are moving right along....good job guys!

2.) Mark and Kyle worked on the mill - we milled the forearm and shoulder support and other pieces to fit various bushings. The shoulder upright support (comes off the robot frame at a slight angle) was milled at a slight angle to tilt the mechanism inside the 28 x 38 x 48 imaginary sizing box.

3.) Max, Cat, and Michelle worked on boring the arm link bushings to fit ball bearings. They did a fab job on a task that requires painstaking skill and patience....every bushing to date has fit PERFECTLY without a single re-work. Great job by all of the lathe Geeksters!!!!

4.) Aaron welded bushings into arms tonight....a critical job where too much heat or too much rod can spoil an evening's painstaking machine work on a bushing. Lokin' good!

4,) Iz spent considerable time getting invoices together in a spreadsheet to get our team expenses re-imbursed. This is a time-consuming and painstaking effort that has to get done for us to move ahead....THANKS IZ!!

Bedtime! TL CG